Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

TWP 4025 E
  1. Products & Services
  2. Powertools
  3. Pumps
  4. Submerged pumps
  5. Submerged waste water pumps
  6. TWP 4025 E

Submerged waste water pump TWP 4025 E

Powerful suction plus effectiveness – the ideal solution for house and garden

Impressive 400 watts of power for pumping up to 7,500 litres per hour

Contaminated water in the house, garden or well should be pumped off as quickly and as effectively as possible – the thoroughly robust and powerful submerged waste water pump TWP 4025 E is perfectly suited for this purpose. It meets every challenge and transports water containing dirt particles sized up to 25 millimetres.

The submerged waste water pump TWP 4025 E reliably transports up to 7,500 litres of contaminated water per hour up to a pump height of 5 metres with a power consumption of 400 W. Flooded basements and living spaces are quickly rendered accessible again, and building or waste water pits can be emptied just as effectively as ponds, tanks or cisterns. Thanks to the pump's high conveying capacity, water can be quickly and easily withdrawn from lakes, ponds or rivers for lawn sprinklers or complex irrigation systems. Naturally, the submerged pump TWP 4025 E is also suited for transporting clear water.

Robust and durable quality

The TWP 4025 E is also perfectly equipped for long-term applications, for the device comes with both a maintenance-free motor and an integrated thermal protection circuit. Furthermore, the high-quality ceramic face seal and a low-wear shaft ensure extreme durability.

The watertight (encapsulation) and impact-resistant plastic housing of the TWP 4025 E is suitable for underwater application to an immersion depth of 5 metres. The robust pump can be put into operation as of a water level of only 90 mm. Once switched on, the device pumps off the waste water until reaching a residual water level of 35 mm.

With a pump height of up to 5 metres, the pump is able to transport water from a flooded basement to the next higher floor and thus out of the house.

The TWP 4025 E combines functional variety with easy handling

The steplessly lockable float switch of the TWP 4025 E offers the option to choose between automatic and manual continuous operation. If, however, the float switch is locked horizontally in the position for permanent operation, the device will operate in continuous mode.

With universal connections for inner diameters of 25 mm and 32 mm as well as with threaded connectors of 1'' and 1½'' further hose and also pipe connections can be established conveniently. The elbow's position can be set to various positions as desired so that it is possible for hoses and pipes to run parallel to the ground. The stable, ergonomic carrying handle additionally facilitates the handling of the compact submerged waste water pump and can also be used for suspending the device at the supplied nylon cord. Thanks to a 10 metre connecting cable the pump can be quickly installed, and using the suspension cord the pump can be easily lowered into the water and raised again when required.

Special equipment features of the TWP 4025 E

Particle size: 25 mm
The submerged waste water pump TWP 4025 E conveys heavily contaminated water with particle sizes of up to 25 millimetres.
Ceramic face seal
The high-quality ceramic face seal and a low-wear shaft extend the pump’s lifetime.
Adjustable elbow
The elbow’s position can be freely adjusted, as a result it is possible for hoses and pipes to run parallel to the ground.
Universal connections
Hoses and pipes with an inner diameter of 25 / 32 mm as well as 1‘‘ / 1½‘‘ threaded connectors can be flexibly coupled with the pump.
Steplessly adjustable float switch
The float can be fastened in any position, this increases the flexibility when setting the switch-on/switch-off point.
Continuous suction operation to a level of 35 mm
When locking the float switch in horizontal position, the pump operates continually and sucks off the water to a level of 35 mm.
Ergonomic carrying handle
For lowering the pump into the water, the supplied 12 m nylon cord is affixed to the sturdy, ergonomic carrying handle.
Schematic overview
TWP 4025 E at one glance: Combined display of relevant performance values such as the switch-on/switch-off point, pump height and submersion depth.

Whether waste or clear water – the submerged pump TWP 4025 E won't let you down

Suitable to an immersion depth of 5 metres
Up to an immersion depth of 5 metres, the submerged pump TWP 4025 E is ideally suited for all applications in contaminated water.
Perfect for draining ponds
Water volumes even of larger garden ponds can be pumped off quickly and easily at a rate of up to 7,500 litres per hour.
For the application in manholes and drainage shafts
With a pump height of up to 5 m the submerged waste water pump TWP 4025 E is ideally suited for emptying manholes or drainage shafts.
For clear and contaminated water in rain barrels
Pumping off or recirculating the clear or contaminated water from cisterns or rain barrels can be accomplished in a trice.
Technical data in comparison

All submerged pumps in direct comparison:

To find the submerged pump which exactly meets your requirements, please consult the concise overview of all submerged pumps from Trotec, which we're providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

A few practical benefits:

  • Impressive 400 watts of power for pumping up to 7,500 litres per hour
  • Maximum pump height: 5 m
  • Ideally suited for water withdrawal as well as for recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
  • For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
  • Extremely durable due to ceramic face seal
  • Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
  • Automatic switch-on/-off due to steplessly adjustable float switch
  • Fixing option for the float switch during automatic operation
  • IPX8 type of protection – protected against the ingress of water upon immersion
  • Universal connection for flexible coupling
  • Large ergonomic carrying handle – suitable for fastening the lowering cable
  • Submerged pump of TÜV-tested quality

All important features at a glance

Clean water
Contaminated water
Powerful 400 W motor
Feed rate of 7,500 litres per hour
Pump height of 5 metres
Immersion depth: 5 metres
A water level of no more than 90 mm is sufficient for starting the device
The device continues to operate to a residual water level of 35 mm
Heavily contaminated water with particle sizes of up to 25 millimetres
Universal connections for inner diameters of 25 mm and 32 mm
Threaded connectors of 1’’, 1¼’’ and 1½’’
Automatic device switch-on/-off
Manual continuous operation
Steplessly lockable float switch
Sturdy, ergonomic carrying handle
Nylon lowering cable of 12 m length
Cable length: 10 metres
For the application in swimming pools
For the application after flooding
For the application in drainage shafts
For the application in garden ponds
Scope of delivery for the submerged clear water pump TWP 4025 E

The submerged pump TWP 4025 E is supplied as complete set including reducer, elbow, a nylon cord of 12 m length and a 10 m power cable.


Altura de entrega y caudal

Pump height and feed rate of the TWP 4025 E

 

With the TWP 4025 E you are always on the safe side, for this submerged waste water pump is supplied in TÜV-tested quality, thus guaranteeing high value, safety and functionality.

Brand quality plus cost-efficiency

Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!

 

Tested for safety, TÜV GS ID 1419062842

Shop

Technical data

Technical data
General information
  Article number 4.610.000.015
Electrical values
  Mains connection 230 - 240 V, 50 Hz
  Power input [kW] 0.4
Electric connection
  Connection plug CEE 7/4
  Cable length [m] 10
Performance data
  Max. conveying capacity [l/h] 7,500
  Grit of pump [mm] 25
  Max. delivery head [m] 5
  Max. submersion depth [m] 5
  Minimum operating depth [mm] 90
  Max. water level after suction [mm] 35
  Max. water temperature [°C] 35
Safety feature
  Type of protection IPX8
  Protection class I
Functions and features
  On/off switch (float switch) Automatic
  Switch-on point float switch [mm] 450
  Switch-off point float switch [mm] 210
  Thermal overload protection
  Backflow preventer
  Stainless steel screws
  Suitable for both permanent operation (>10h) or salt-water operation
Housing design
  Plastics
Accessories scope of delivery
  Adapter
  Hose connection (inner diameter) 25 / 32 mm
  Threaded connection 1" , 1 ½"
  Backflow preventer
Dimensions
  Length (packaging excluded) [mm] 220
  Width (packaging excluded) [mm] 160
  Height (packaging excluded) [mm] 310
Weight
  (packaging excluded) [kg] 3.7

 standard equipment

 optionally available

 not available

Alternative products

Loading...

Accessories

Loading...

Seminars

Downloads

Loading...