Choose a borehole pump for reliable water extraction from depth

Deep well pumps extract suitable clear utility water from boreholes, wells and deep shafts for garden irrigation and approved non-potable water systems. Unlike surface-mounted garden pumps, they operate directly in the water and push it upwards through a pressure line. Compare delivery head, flow rate, maximum immersion depth, borehole diameter and electrical control requirements to choose the right pump for your installation.

Extract clear utility water from deep wells and boreholes

Deep well pumps are designed to operate below the water surface in wells, boreholes and suitable shafts. Instead of drawing water through a long suction line from above ground, the submerged pump pushes it upwards through a pressure pipe. This makes borehole pumps suitable for water sources that are too deep for the suction capability of a conventional surface-mounted garden pump.

Typical applications include supplying compatible garden irrigation equipment and providing clear utility water for approved non-potable uses. The water source must provide sufficient water during pumping, and the water quality must remain within the pump's specified limits. A deep well pump is not automatically suitable for drinking water, sewage, abrasive sediment or continuous industrial water extraction.

Match delivery head and flow rate to the water demand

Maximum delivery head describes a pump's pressure capability as an equivalent height of water. Maximum flow rate describes the greatest specified water volume delivered under defined conditions. These two maximum values are normally reached at different operating points and should not be combined as if both were available simultaneously.

For a borehole installation, consider the water level during pumping, the height of the outlet, the pressure required by connected irrigation equipment and the losses in the pressure pipe. Flow rate decreases as the required head and system resistance increase. Compare the pump performance curve at the intended operating point rather than choosing a model solely by its maximum delivery head or electrical wattage.

Distinguish well depth, water level and immersion depth

The total depth of a borehole is not the same as the distance the pump is submerged below the water surface. Water levels can also fall while pumping, so the dynamic water level is particularly important when selecting the installation position and assessing whether the well can supply the required flow.

Check the maximum permitted immersion depth for the exact pump and ensure that the complete unit remains submerged during operation. The pump must not run dry if the water level falls. Its suspension position must also provide adequate clearance from the bottom of the borehole. A high maximum delivery head does not authorise installation beyond the manufacturer's immersion-depth limit.

Check borehole diameter and the space needed for installation

Deep well pumps have a slim, elongated construction, but their installation dimensions vary. Check the minimum permitted borehole diameter for the exact model rather than relying on the nominal outside diameter of the pump housing. The borehole must provide enough room for the pump, cable, pressure pipe and safe installation without obstructing or damaging these components.

The shaft should be sufficiently straight and free of protruding edges. Position the pump vertically and keep the required clearance above the well bottom to reduce the risk of drawing in accumulated sediment. Lower and secure the unit using an approved lifting cord or suspension system attached to the designated suspension points. Never use the power cable or pressure pipe to carry the pump's weight.

Select a pump for the actual well-water quality

Deep well pumps are intended to transport water that meets the manufacturer's requirements for permitted temperature, suspended particles and chemical composition. An integrated intake strainer helps prevent larger debris from entering the pump, but it does not make the unit suitable for abrasive sand, sludge or heavily contaminated water.

Check the relevant water-quality limits before installation, especially where groundwater contains sediment or dissolved substances that may affect the pump. Do not assume that a stainless steel housing or intake strainer guarantees compatibility with aggressive liquids. These pumps are not drinking-water treatment systems and must not be presented as suitable for potable-water supply without an explicit approval for the exact product.

Choose pressure pipes, fittings and non-return valves correctly

A borehole pump pushes water upwards through a pressure line, so hoses and pipes must withstand the operating pressure and be compatible with the pump's connection. Check the specified thread size, pipe diameter, pressure rating and installation length. Excessively narrow pipes, restrictive fittings and long routes can reduce the water delivered at the outlet.

Selected deep well pumps have an integrated non-return valve to limit water flowing back after shutdown. This does not automatically prevent water remaining in the pipe from freezing. Plan the complete pipework with the required fittings, suitable sealing and protection against frost. A suction hose or another hose not rated for pressure must not be substituted for an approved discharge line.

Check the electrical supply and external control equipment

Deep well pumps differ in their electrical connection and control arrangements. Some models have a mains plug and integrated electrical components, while other models require a separate external control box. A control box designed for a particular pump is a necessary part of its electrical system and must not be bypassed or replaced with an unapproved connection.

Before ordering, check the specified supply voltage, maximum electrical power consumption, cable length and required protective devices. The control box must be installed in an appropriate protected location rather than submerged with the pump. Electrical connections and work requiring the control box to be opened must be carried out by qualified personnel in accordance with the operating instructions and applicable regulations.

Add compatible pressure control for demand-based operation

A deep well pump can supply water to compatible irrigation equipment or an approved utility-water system. Where required, a suitable pressure controller can switch the pump according to water demand and monitor conditions in the connected pressure line. This arrangement differs from the manual switching provided by some pump configurations.

Check the exact compatibility of the pressure switch and pump, including electrical load, operating pressure, minimum flow and required installation components. Automatic switching does not increase the pump's delivery capacity or establish approval for unrestricted continuous operation. Where dry-run protection is needed, select a documented compatible solution and account for the actual water yield of the well.

Plan safe operation, inspection and frost protection

Correct borehole installation is essential for safe water extraction. Keep the pump fully submerged during operation, secure it above the well bottom and ensure that electrical connections remain protected from moisture and flooding. Use the residual-current protection specified in the manual. Never operate the pump while people or animals are in the water or able to access it.

Inspect the installation as required, including the suspension arrangement, pressure connections and accessible intake components. Observe the manufacturer's operating limits and any restrictions on repeated starts. Thermal motor protection does not make dry running safe. Before maintenance, disconnect the electrical supply, and protect the pump and connected equipment against freezing conditions according to the operating instructions.

Check the complete borehole pumping system before ordering

Choose a deep well pump according to the water source, required pumping performance and installation conditions rather than one maximum specification.

  • Confirm that the water source and intended application are suitable for non-potable utility-water extraction;
  • Measure the borehole diameter, total depth and water level during pumping;
  • Determine the required flow rate and delivery head, including outlet pressure and pipe losses;
  • Check maximum immersion depth, complete submersion and the required clearance above the well bottom;
  • Verify permitted water temperature, particle size and water-quality limits;
  • Choose a suitable suspension system, pressure pipe, fittings and approved non-return arrangement;
  • Confirm the electrical supply, pump cable, required control box and protective devices;
  • Check whether a compatible pressure controller or other documented protection is required;
  • Review dry-running restrictions, switching frequency, inspection and frost-protection requirements.

For shallow water sources that can be reached by a surface-mounted pump, compare garden pumps. For automatic utility-water supply with a pressure vessel, review the domestic waterworks range and the applicable installation requirements.